Cody Wilson, owner of Defense Distributed, holds a 3D-printed gun called the Liberator at his shop in Austin, Texas, on Aug. 1. (Eric Gay/The Associated Press)

Cody Wilson, owner of Defense Distributed, holds a 3D-printed gun called the Liberator at his shop in Austin, Texas, on Aug. 1. (Eric Gay/The Associated Press)

Judge blocks online plans for printing untraceable 3D guns

  • By Martha Bellisle The Associated Press
  • Tuesday, August 28, 2018 2:13pm
  • News

By Martha Bellisle

The Associated Press

A U.S. judge in Seattle blocked the Trump administration Monday from allowing a Texas company to post online plans for making untraceable 3D guns, agreeing with 19 states and the District of Columbia that such access to the plastic guns would pose a security risk.

The states sued to stop an agreement that the government had reached with Austin, Texas-based Defense Distributed, saying guidelines on how to print undetectable plastic guns could be acquired by felons or terrorists.

U.S. District Judge Robert Lasnik extended a temporary restraining order, and his new decision will last until the case is resolved.

He said Cody Wilson, owner of Defense Distributed, wanted to post the plans online so that citizens can arm themselves without having to deal with licenses, serial numbers and registrations.

Wilson has said that “governments should live in fear of their citizenry.”

“It is the untraceable and undetectable nature of these small firearms that poses a unique danger,” Lasnik said.

“Promising to detect the undetectable while at the same time removing a significant regulatory hurdle to the proliferation of these weapons — both domestically and internationally — rings hollow and in no way ameliorates, much less avoids, the harms that are likely to befall the states if an injunction is not issued.”

State Attorney General Bob Ferguson praised the ruling.

“Once again, I’m glad we put a stop to this dangerous policy,” Ferguson said. “But I have to ask a simple question: why is the Trump administration working so hard to allow these untraceable, undetectable 3D-printed guns to be available to domestic abusers, felons and terrorists?”

The State Department had reached the settlement with the company after the agency removed the 3D gun-making plans from a list of weapons or technical data that cannot be exported overseas.

The states argued that the federal agency didn’t follow the law when it removed 3D guns from the munitions list. They said the government was supposed to notify Congress and provide a 30-day window before making a change to that list, but it did not.

Lasnik criticized the government for switching its position on the threat posed by the 3D gun-making plans.

Up until April, the government argued the distribution of the guidelines “posed a threat to world peace and the security and foreign policy of the United States,” the judge said.

Despite those fears, the government decided that it only needed to restrict the international availability of firearms up to .50 caliber. That’s when they reached a settlement with the 3D gun company.

There was no indication the government evaluated the unique characteristics of the plastic guns when it considered deleting that category of weapons from the prohibited list, the judge said.

“Nor is there any reasoned explanation for its change in position,” Lasnik said.

The federal government didn’t immediately respond to a request for comment on the judge’s ruling.

A lawyer with the U.S. Justice Department had argued against the injunction, saying possessing 3D plastic guns is already against the law, and the federal government is committed to enforcing that law.

But the judge said it wasn’t enough.

“While the court appreciates the earnestness with which this commitment was made at oral argument, it is of small comfort to know that, once an undetectable firearm has been used to kill a citizen of Delaware or Rhode Island or Vermont, the federal government will seek to prosecute a weapons charge in federal court while the state pursues a murder conviction in state court,” Lasnik said.

The Brady Campaign to Prevent Gun Violence, a pro-gun control group that has aggressively fought the online release of the gun plans, praised the judge’s ruling “as a tremendous victory for the American public.”

Avery Gardiner, co-president of the group, said 3D-printed guns “represent a supreme threat to our safety and security, and we are grateful that Judge Lasnik recognized it as such.”

The states suing are Washington, Connecticut, Maryland, New Jersey, New York, Oregon, California, Colorado, Delaware, Hawaii, Illinois, Iowa, Minnesota, North Carolina, Rhode Island, Vermont, Virginia, Massachusetts, Pennsylvania and the District of Columbia.

More in News

John Brewer.
Former editor and publisher of PDN dies

John Brewer, 76, was instrumental in community

Randy Perry and Judy Reandeau Stipe, volunteer executive director of Sequim Museum & Arts, hold aloft a banner from "The Boys in the Boat" film Perry purchased and is loaning to the museum. (Michael Dashiell/Olympic Peninsula News Group)
‘Boys in the Boat’ banner to be loaned to museum

Sequim man purchases item shown in film at auction

Charisse Deschenes, first hired by the city of Sequim in 2014, departed this week after 10 years in various roles, including most recently deputy city manager/community and economic development director. (City of Sequim)
Deputy manager leaves Sequim

Community, economic development position open

Hoko River project seeks salmon recovery and habitat restoration

Salmon coaltion takes lead in collaboration with Makah, Lower Elwha tribes

Clallam Transit’s zero-fare program off to successful start

Ridership is up and problems are down, general manager says

Motor rider airlifted to Seattle hospital after wreck

A Gig Harbor man was airlifted to a Seattle hospital… Continue reading

Traffic light project to begin Monday

Work crews from Titan Earthwork, LLC will begin a… Continue reading

From left to right are Indigo Gould, Hazel Windstorm, Eli Hill, Stuart Dow, Mateu Yearian and Hugh Wentzel.
Port Townsend Knowledge Bowl team wins consecutive state championships

The Knowledge Bowl team from Port Townsend High School has… Continue reading

Bob Edgington of 2 Grade LLC excavating, which donated its resources, pulls dirt from around the base of an orca sculpture at the Dream Playground at Erickson Playfield on Thursday during site preparation to rebuild the Port Angeles play facility, which was partially destroyed by an arson fire on Dec. 20. A community build for the replacement playground is scheduled for May 15-19 with numerous volunteer slots available. Signups are available at https://www.signupgenius.com/go/904084DA4AC23A5F85-47934048-dream#/. (Keith Thorpe/Peninsula Daily News)
Site preparation at Dream Playground

Bob Edgington of 2 Grade LLC excavating, which donated its resources, pulls… Continue reading

Rayonier Inc. is selling more than 115,000 acres in four units across the West Olympic Peninsula last week as the company looks to sell $1 billion worth of assets. (Courtesy photo / Rayonier Inc.)
Rayonier to sell West End timberland

Plans call for debt restructuring; bids due in June

Port Angeles port approves contract for Maritime Trade Center bid

Utilities installation, paving part of project at 18-acre site